We offer many varieties of washer for all kinds of projects. From fender to tooth type locking washers we have what you need in stock for shipment today. We also offer many of our washers in special materials and non-standard sizes. Use our contact form and request a quote today.
- Fender Washers
A fender washer, though similar in shape to a standard washer, differs in that the outside diameter is traditionally much larger in proportion to the center hole. With this design, a fender washer can be placed under the head of a bolt or nut to help distribute forces applied when tightening.
- Lock Washers
A locking washer that works by having a side tab that can be bent into place against a nut. Lock washers, locknuts, jam nuts, and thread-locking fluid are ways to prevent vibration from loosening a bolted joint.
- Finishing Washers
Finishing Washer, Finish Washer. Finishing washers are used in applications where the decorative appearance is important. The flat head screw recesses into the finish washer to provide a clean appearance and the washer grips fabric and other light materials securely away from the hole.
- NAS Washers
NAS Flat Washers feature a smaller Outside Diameter (OD) and Inside Diameter (ID) as per the National Aerospace Standards. NAS flat washers are standardized for use with aircrafts and military applications requiring National Aerospace Standards.
- Flat Washers
A washer is a thin plate disk-shaped with a hole with a hole that is normally used to distribute the load of a threaded fastener, such as a bolt or nut. Washers are also important for preventing galvanic corrosion, particularly by insulating steel screws from aluminum surfaces.
- Tooth Washers
The toothed lock washer is designed to prevent a nut or bolt head from loosening with the strut action set up by the teeth. The teeth, also, absorb shock and vibration. The teeth, also, abrade the grounding surface in electrical grounding applications to improve the electrical connection.