c Aluminum | Fastener Materails | Tri Suppli

ALUMINUM

Aluminum, and Aluminum alloys, make some of the most versatile, economical, and attractive metallic materials for a broad range of uses. From soft, highly ductile wrapping foil to the most demanding engineering applications. Aluminum alloys are alloys in which Aluminum (Al) is the predominant metal. The typical alloying elements are copper, magnesium, manganese, silicon, tin and zinc. There are two principal classifications, namely casting alloys and wrought alloys, both of which are further subdivided into the categories heat-treatable and non-heat-treatable. Appropriately alloyed and treated, Aluminum can resist corrosion by water, salt, and other environmental factors, and a wide range of other chemical and physical agents.

2024-T4, 6061-T6, 6262-T9, and 7075-T73 are most commonly used to make aluminum threaded fasteners.

  • Corrosion Resistance

    Alloy 1100 – Excellent
    Alloy 2011 – Poor
    Alloy 2024 – Poor
    Alloy 3003 – Good
    Alloy 5052 – Excellent
    Alloy 6061 – Excellent
    Alloy 6063 – Good
    Alloy 7075 – Average

  • Strength

    Alloy 1100 – Low Strength
    Alloy 2011 – High Strength alloy
    Alloy 2024 – High Strength
    Alloy 3003 – Medium Strength
    Alloy 5052 – Med/High Strength
    Alloy 6061 – Med/High Strength
    Alloy 6063 – Medium Strength
    Alloy 7075 – High Strength

  • Typical End Use

    Alloy 1100 - General Fabrication
    Alloy 2011 - General Machining
    Alloy 2024 - Aerospace
    Alloy 3003 - Food & Chemical
    Alloy 5052 - Marine
    Alloy 6061 - Structural
    Alloy 6063 - Architectural
    Alloy 7075 - Aerospace

DISCLAIMER

All the information provided in this section has been assembled with concern for accuracy. It is intended for advisory purposes only and use of this information is completely voluntary. We do not guarantee its completeness or validity and assume no responsibility for any loss, claims or damages resulting from use or application of this information. All information is subject to change without prior notice. Be sure to verify!All the information provided in this section has been assembled with concern for accuracy. It is intended for advisory purposes only and use of this information is completely voluntary. We do not guarantee its completeness or validity and assume no responsibility for any loss, claims or damages resulting from use or application of this information. All information is subject to change without prior notice.